Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Tata Bolt

Model: Tata Bolt MK 1 - Years 2014-2019
Part: Service warning light

If you notice the service light appearing when starting your Tata Bolt, don’t worry because you can easily reset it manually by following the procedure described below. First, insert the key and turn on the ignition. Press the "Mode" button several times until the mini display shows the remaining kilometers until maintenance. At this point, turn off and then turn on the ignition again. Immediately after, press and hold the "Set" and "Mode" buttons simultaneously for about 10 seconds, then release them. The reset procedure is now complete, and you can turn off the ignition.

Updated on 3 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Tata Bolt?
How to Reset the Service Light on the Tata Bolt?
Tata Bolt (2014-2019 / MK 1) The procedure to reset the service light is the same for several Tata vehicles: Bolt, Tiago, Tigor, and Zest. After performing the maintenance, turn …
Resetting the service light indicator of the Tata Bolt.
Resetting the service light indicator of the Tata Bolt.
Tata Bolt (2014-2019 / MK 1) After performing the regular maintenance check, it is necessary to reset the service light; let's see how to reset the maintenance light of the Tata …
How to reset the service light on the Tata Bolt
How to reset the service light on the Tata Bolt
Tata Bolt (2014-2019 / MK 1) After performing the service, we will see how to reset the maintenance service light for the regular oil change of the Tata Bolt. First, we get into …

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos