Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Wheel Bearing of the Tata Bolt

Model: Tata Bolt MK 1 - Years 2014-2019
Part: Bearing

In this guide, you will discover how to remove and replace the rear wheel bearing of the Tata Bolt. First, lift the vehicle, even just the rear part, and start by removing the wheel; then remove the brake drum by unscrewing the central nut. At this point, proceed with the extraction of the drum bearing; use a hydraulic press or a puller made of a threaded rod and nuts that match the width of the bearing. Once removed, install the new bearing, ensuring it is seated properly; then reassemble the drum!

Updated on 24 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Wheel Bearing on a Tata Bolt
Replacing the Rear Wheel Bearing on a Tata Bolt
Tata Bolt (2014-2019 / MK 1) In this brief and simple guide, discover how to disassemble and replace the rear wheel bearing of the drum on a Tata Bolt. First, lift the vehicle at…
How to Replace the Key Battery on a Tata Bolt
How to Replace the Key Battery on a Tata Bolt
Tata Bolt (2014-2019 / MK 1) In this new guide for all of you with a Tata Bolt, we will discover the steps to correctly replace the small battery inside the key. First, get a sma…
How to Replace the Thermostat on a Tata Bolt
How to Replace the Thermostat on a Tata Bolt
Tata Bolt (2014-2019 / MK 1) In this brief guide, you will see the main instructions that will allow you to remove and replace the thermostat on a Tata Bolt. First, open the hood…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos