Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulbs in a Tata Nano

Model: Tata Tata Various
Part: Headlight bulb

In this tutorial, you will see how to replace the headlight bulbs in a Tata Nano, a very simple task. First, ensure the key is not inserted, then open the bonnet and unscrew the 2 fixing bolts for the headlight located on the upper edge. Next, grasp the headlight and tilt it towards you to access the rear. Finally, disconnect the connector, remove the rubber cover, and extract the bulb by releasing the metal clip. Install the replacement bulb by following the reverse procedure and avoid touching it directly with your bare hands.

Updated on 23 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb on the Tata Manza
How to replace the headlight bulb on the Tata Manza
Tata Tata Various In this new guide dedicated to your Tata Manza, we will explain the various steps to follow if you want to replace the front headlight bulb independe…
Where is the Fuse Box on the Tata Harrier?
Where is the Fuse Box on the Tata Harrier?
Tata Tata Various If you own a Tata Harrier, you must know the exact location of all the various fuses to intervene quickly and effectively in case of electrical fault…
How to Reset the Service Light on a Tata Punch?
How to Reset the Service Light on a Tata Punch?
Tata Tata Various To completely clear the Service light on a Tata Punch, insert the ignition key into the ignition switch so that the instrument panel lights up: once …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos