Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the car radio on the Tata Altroz?

Model: Tata Altroz MK 1 - Years 2020-2026
Part: Car stereo

In order to replace the Tata Altroz car radio, you need to pry with an object, so that you can detach the panel positioned above the instrument panel. Once detached, you will have to unscrew its underlying screws, in order to be able to remove the cover located around the steering column. By removing the latter, the panel located along the entire dashboard can be detached; at this point it will be possible to install the new panel, on which the new radio will also be present, which must be suitably connected. After the installation it will be possible to mount all the previously removed panels.

Posted on 18 January 2023 by ScegliAuto

Video tutorial

Related tutorials

How to replace the horn of the Tata Altroz
How to replace the horn of the Tata Altroz
Tata Altroz (2020-2026 / MK 1) Let's see in this short guide the main instructions for disassembling and replacing the horn or the horn of the Tata Altroz. First we open the bonnet…
How do you replace the air filter on the Tata Altroz?
How do you replace the air filter on the Tata Altroz?
Tata Altroz (2020-2026 / MK 1) In order to replace the air filter on the Tata Altroz you have to open the hood so that you can access the components inside the engine compartment. …
How to replace the radio antenna on the Tata Altroz
Tata Altroz (2020-2026 / MK 1) If we want to customize our car by replacing the antenna with a model that has a shorter shaft and that has higher performance in the reception of ra…

Timing Belt Replacement on Audi Q5

The timing belt on the Audi Q5 has reached its mileage limit, so what should you do? Let's go through the removal of the belts on the Q5. Open and lift the hood of the engine, then remove the engine soundproofing panel. Once these steps are completed, remove the plastic covers of the belts located on the left side of the engine. Loosen the second tensioner and slide the belt out of its seat. After installing the new belt, use a wrench to install the tensioner pulley, and tighten it until the belt has the correct tension (install both belts). Reinstall the covering plastics. Start and test the Audi Q5 engine.

Watch the video!


by ScegliAuto

More videos