Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Tata
    3. :
  3. Altroz
    4. : How to replace the horn of the Tata Altroz

Tata Altroz - Video tutorial

Model: Tata Altroz MK 1 - Years 2020-2024
Operation: How to replace the horn of the Tata Altroz

Let's see in this short guide the main instructions for disassembling and replacing the horn or the horn of the Tata Altroz. First we open the bonnet of our car and start removing the small plastic cover and all the bulkhead located above the bumper to access our horn; after which we unscrew the fixing screws of the horn, disconnecting the electrical wiring to remove it and replace it with the new one, as shown in the video. At this point we install, applying the opposite procedure, the new horn!


Posted on 14 June 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos