Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Tata Nexon maintenance light

Model: Tata Nexon MK 1 - Years 2017-2024
Part: Warning light – error code

For this short guide we will see how to reset the maintenance light for the Tata Nexon. To proceed, carry out the following steps in order: 1. Activate the instrument panel without starting the engine; 2. Use the push button located on the left of the instrument panel, near the rev counter, to reset the warning light; 3. Press and hold it for about 15 seconds, until the screen starts flashing; 4. Only at this point, let go of the button, wait a few seconds, then press and hold the button down again, for about another 15 seconds; 5. If the display updates, the reset was successful.

Posted on 25 March 2023 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Tata Nexon
How to reset the service light on the Tata Nexon
Tata Nexon (2017-2024 / MK 1) The service light reset on a Tata Nexon vehicle must be done after performing the maintenance and inspection work related to the car service. After c…
How to replace the gear knob of the Tata Nexon.
How to replace the gear knob of the Tata Nexon.
Tata Nexon (2017-2024 / MK 1) For the DIY replacement of the gear knob on your Tata Nexon, simply follow the following procedure. First, enter the car, reach the driver's seat, an…
Resetting the service light on the Tata Nexon.
Resetting the service light on the Tata Nexon.
Tata Nexon (2017-2024 / MK 1) The information provided in this guide will explain how to reset the maintenance service light for the regular oil change of the Tata Nexon engine. F…

Other guides you may be interested in

How to Replace the Antenna on a Volkswagen Bora

Want to replace the damaged radio antenna on your car but don't know how to proceed? In this video, we will show you the very simple steps to take. After purchasing the new antenna (with the same size and thread as the original), unscrew the old one by hand until it is completely detached from its base. Take the new antenna and screw it (until fully tightened) into the plastic base on the roof of your car. Finally, check the correct functioning of the antenna by turning on the radio and receiving channels.

Watch the video!


by ScegliAuto

More videos