Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Cabin Filter from a Nissan Juke

Model: Nissan Juke MK 1 - Years 2010-2019
Part: Cabin air filter

In this video, let’s see how to remove the cabin air filter from a Nissan Juke. Open the glove compartment and unclip the end stop arms. Then, use a screwdriver to remove the securing screws. After completing the previous steps, unscrew the side screws in the glove compartment and remove the plastic cover. Unscrew the screws again, and after disconnecting the power cables, pull the glove compartment away from the dashboard. Then, slide the air filter out of its housing as shown in the video. Insert the new filter and reassemble all the components of the glove compartment as you disassembled them earlier.

Updated on 26 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Nissan Juke (2010-2019 / MK 1) How to remove the pollen filter on a Nissan Juke? Follow this procedure. Use a plastic lever to remove the clips on the trim at the bottom of the das…
Nissan Juke (2010-2019 / MK 1) To replace the cabin air filter in your first-generation Nissan Juke (2010-2019), follow these steps. Before starting, ensure the car is completely o…
Nissan Juke (2010-2019 / MK 1) The cabin air filter in the Nissan Juke is installed behind the glove compartment. As shown in the video, first, remove the four screws underneath th…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos