Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin air filter of the Nissan Juke

Model: Nissan Juke MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Cabin air filter

See other generations:
Video tutorial

Below we will see the instructions for replacing the cabin air filter or pollen filter of the Nissan Juke. First, we get on board the car and start by releasing the two side rods of the glove compartment; then we unscrew the internal screws to lower it and remove it, as shown in the video.

At this point, we remove the cover of the pollen filter box, removing and replacing the cartridge inside with the new one; we install the new cabin air filter, inserting it in the correct direction, and finally reassemble the glove compartment!


Posted on 22 October 2025 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter in a Nissan Juke
How to Replace the Cabin Filter in a Nissan Juke
Nissan Juke (2010-2019 / MK 1) To replace the cabin air filter in your first-generation Nissan Juke (2010-2019), follow these steps. Before starting, ensure the car is completely o…
How to Change the Air Filter on a Nissan Juke
How to Change the Air Filter on a Nissan Juke
Nissan Juke (2010-2019 / MK 1) How to change the engine air filter? Remove the air filter from the Nissan Juke and replace it with a new identical one. Lift the front bonnet and se…
Replacement of the air filter for the Nissan Juke.
Replacement of the air filter for the Nissan Juke.
Nissan Juke (2010-2019 / MK 1) Today, let's go through the steps on how to disassemble and replace the engine air filter of the Nissan Juke. First, we open the car's hood and start…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos