Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Cabin Filter in the Nissan Juke?

Model: Nissan Juke MK 1 - Years 2010-2019
Part: Cabin air filter

The cabin air filter in the Nissan Juke is installed behind the glove compartment. As shown in the video, first, remove the four screws underneath the glove compartment and then the internal ones. Now that you have freed the glove compartment, disconnect it and remove it from its housing, taking care to disconnect the bulb connector. Now you can extract the old air filter and insert the new one by bending it to pass through the gap. Finally, reassemble everything by following the same procedure in reverse. It is recommended to use a new filter without washing and reusing the old one as some do.

Updated on 7 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Filter on a Nissan Juke
How to Replace the Cabin Filter on a Nissan Juke
Nissan Juke (2010-2019 / MK 1) To replace the cabin filter on a Nissan Juke, remove the side trim panel located on the left side of the passenger footwell. Once this panel is detac…
How to replace the cabin filter on the Nissan Juke?
How to replace the cabin filter on the Nissan Juke?
Nissan Juke (2010-2019 / MK 1) To replace the cabin filter on the Nissan Juke, loosen the screws located at the bottom of the glove compartment; then open it to unscrew those at th…
How to Replace the Cabin Filter in a Nissan Juke
How to Replace the Cabin Filter in a Nissan Juke
Nissan Juke (2010-2019 / MK 1) To replace the cabin air filter in your first-generation Nissan Juke (2010-2019), follow these steps. Before starting, ensure the car is completely o…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos