Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to check the oil level and perform an oil top-up on the Tata Winger.

Model: Tata Winger MK 1 - Years 2007-2019
Part: Checks and maintenance

If we want to proceed independently to check the oil level and eventually top it up on this car model, in the description below we find the simple information and necessary steps, and we can also use the video. After opening the engine hood, locate the oil level check dipstick and the filling cap. With a cold engine, extract the dipstick and clean it with a cloth. Reinsert the dipstick and wait a few seconds, then lift it again and check the level, which should be between the minimum and maximum marks. If the level is below the minimum, it is necessary to unscrew the yellow cap and top up the missing oil.

Posted on 23 June 2023 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the rear brake shoes on the Tata Winger?
How do you replace the rear brake shoes on the Tata Winger?
Tata Winger (2007-2019 / MK 1) In order to replace the rear brake shoes of the Tata Winger you have to lift the rear part of the vehicle, so that it is not in contact with the floo…
How do you replace the front wheel bearing of the Tata Winger?
How do you replace the front wheel bearing of the Tata Winger?
Tata Winger (2007-2019 / MK 1) In order to replace the front wheel bearing of the Tata Winger, you need to lift the vehicle with a jack so that the corresponding wheel is not in co…
How to replace the diesel filter in the Tata Winger van?
How to replace the diesel filter in the Tata Winger van?
Tata Winger (2007-2019 / MK 1) In this tutorial we can see how to replace the diesel filter in the Tata Winger van, an extremely simple and fast operation. First of all, let's make…

Other guides you may be interested in

How to Remove the Door Panel on a Mini

Perform the disassembly of the door panel (front right) on a Mini: disconnect the battery terminals located in the engine bay (if you need to disconnect terminals). Use a lever to remove the plastics in the area of the upper door opening lever and the screws present in the handle (if any). Remove the trim near the window, unscrew the remaining screws on the door panel and detach the securing clips. Finally, pull the panel away with your hands and detach it from the door (disconnect the power wiring and the opening cable).

Watch the video!


by ScegliAuto

More videos