Do it yourself
Frequently asked questions about cars and motorcycles
In order to install the engine guard plate of the TM Racing 250, you need to insert it into its housing, located in the front lower part of the frame, immediately behind the front wheel. Once the plate is correctly positioned, it can be secured with the corresponding screws so that it is attached to the frame. The installation of the plate will protect the lower engine block from any objects that may hit it; the plate will need to be removed for any oil replacements.

Posted on 27 August 2024 by ScegliAuto

Video tutorial

Related tutorials

Tm Racing 250 To carry out the engine oil change procedure for the TM Racing 250, you will need to unscrew the plug located at the central lower part of the bike, …
Tm Racing 250 It will be possible to replace the engine oil of the TM Racing 250 by unscrewing the cap located in the central lower part of the motorcycle, which w…
Tm Racing 250 To replace the exhaust on a TM Racing 250, loosen the bolts securing it to its housing, located on the right side of the bike near the mudguard. Once…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos