Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To carry out the engine oil change procedure for the TM Racing 250, you will need to unscrew the plug located at the central lower part of the bike, which will allow you to drain the used oil: once all the oil has been removed, you can also remove the oil filter, which is located in the same spot. Then, insert the new replacement part into its housing and proceed with the refill: pour the necessary amount of oil through the breather located on the right side of the bike, ensuring everything is functioning correctly.

Posted on 30 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the engine oil of the TM Racing 250?
How do you replace the engine oil of the TM Racing 250?
Tm Racing 250 It will be possible to replace the engine oil of the TM Racing 250 by unscrewing the cap located in the central lower part of the motorcycle, which w…
How do you install the engine guard plate of the TM Racing 250?
How do you install the engine guard plate of the TM Racing 250?
Tm Racing 250 In order to install the engine guard plate of the TM Racing 250, you need to insert it into its housing, located in the front lower part of the frame…
How to Replace the Exhaust on a TM Racing 250?
How to Replace the Exhaust on a TM Racing 250?
Tm Racing 250 To replace the exhaust on a TM Racing 250, loosen the bolts securing it to its housing, located on the right side of the bike near the mudguard. Once…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos