Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to replace the air filter of the TM Racing 125, you will need to loosen the screws that secure the side panels of the bike located immediately under the seat. Once these panels have been removed from their housing, it will be possible to detach the seat and access the filter box underneath. Now, you will need to open this box and remove the filter from its seat: then, insert the new replacement piece in order to close the box. By repositioning the seat and side panels, you can verify that everything is functioning correctly.

Posted on 15 March 2025 by ScegliAuto

Video tutorial

Related tutorials

Cleaning the Air Filter on a TM Racing 125
Cleaning the Air Filter on a TM Racing 125
Tm Racing 125 The air filter should be cleaned periodically based on the usage of the bike: for motard use primarily on the road or possibly on track (without off-…
How do you replace the exhaust valve of the TM Racing 125?
How do you replace the exhaust valve of the TM Racing 125?
Tm Racing 125 In order to replace the exhaust valve of the TM Racing 125, you need to loosen the cover located on the right side of the cylinder of the motorcycle:…
How do you replace the exhaust pipe of the TM Racing 125?
How do you replace the exhaust pipe of the TM Racing 125?
Tm Racing 125 To replace the exhaust of the TM Racing 125, you need to loosen the screws that secure the side panel of the rear fender: once this panel is removed,…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos