Do it yourself
Frequently asked questions about cars and motorcycles
In order to replace the exhaust of the TM Racing MX 125, you need to loosen the screws that secure the panel located on the right side of the rear fender. Once this panel is released, you can proceed by completely detaching it and locating the exhaust underneath. The exhaust can be removed from its seat by loosening the screws that secure it and loosening the connecting clamp between the exhaust and the header. At this point, you can remove the old exhaust in order to install the new one.

Posted on 21 November 2025 by ScegliAuto

Video tutorial

Related tutorials

Mx 125 To replace the piston on the TM Racing MX 125, first remove the engine block from its housing, located at the central lower part of the frame. Once t…
Mx 125 To dismantle the gearbox of the TM Racing MX 125, loosen all the screws securing the two casings, which contain the gearbox gears and the clutch. Onc…
Mx 125 To replace the piston on the TM Racing MX 125, you need to loosen the bolts securing the side panels of the bike, allowing them to be removed for acc…

How to Replace the Drive Belt of the Piaggio Vespa 50 ET2

Today, we will discover the instructions that will allow us to dismantle and replace the drive belt of the Piaggio Vespa 50 ET2. First, place the scooter on the stand and start unscrewing all the fixing screws found on the side of the transmission cover to remove it; then unscrew the screw of the fan and the variator, subsequently removing the drive belt, as shown in the video. At this point, install the new toothed belt, as well as the original one, correctly refitting the fan and finally the side cover of the transmission.

Watch the video!


by ScegliAuto

More videos