Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the clutch actuator on the TM Racing SMR 125?

Model: Tm Racing Smr 125
Part: Clutch

Video tutorial

To replace the clutch actuator on the TM Racing SMR 125, loosen the screws that secure it to its housing on the left side of the bike, right next to the clutch cover. Once the screws are loosened, disconnect the cable attached to the actuator to remove it completely.

Now, insert a new gasket and reposition the actuator on top of it, reconnecting it to the appropriate cable. After reconnecting, ensure that the clutch engages correctly.


Updated on 10 September 2026 by ScegliAuto


Related tutorials

How to Replace the Clutch on a TM Racing SMR 125?
Smr 125 To replace the clutch on a TM Racing SMR 125, you need to loosen the bolts securing the circular cover located on the right side of the bike. Once th…
How to Replace the Silencer of the TM Racing SMR 125
How to Replace the Silencer of the TM Racing SMR 125
Smr 125 To replace the silencer on the TM Racing SMR 125, you need to unscrew all the bolts securing the rear side fairing, behind which the old silencer is …
How do you replace the exhaust pipe of the TM Racing SMR 125?
How do you replace the exhaust pipe of the TM Racing SMR 125?
Smr 125 To replace the exhaust pipe of the TM Racing SMR 125, you need to loosen the screws that hold the side panel on the right side of the motorcycle: onc…

How to Replace the Brake and Clutch Levers on a Kawasaki Z750

Briefly follow these instructions to remove and replace the front brake and clutch levers on the Kawasaki Z750 motorcycle. First, place your motorcycle on a stand and start by unscrewing the pin for the front brake lever, loosening the nut located at the bottom; remove and replace the lever with a new one, securing it properly and finally adjusting the lever travel as shown in the video. Similarly, replace the clutch lever by unscrewing the pin; in this case, attach the metal cable to the lever and make the adjustment using the adjuster!

Watch the video!


by ScegliAuto

More videos