Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Tm Racing Smr 450 F - Video guides

Tm Racing Smr 450 F
How do you replace the motor oil of the TM Racing SMR 450?
In order to replace the motor oil of the TM Racing SMR 450, you need to loosen the oil tank drain plug, which is located at the bottom of the vehicle. Once the …Read all…
Posted on 6 June 2025 by ScegliAuto
Tm Racing Smr 450 F
How do you disassemble the engine of the TM Racing SMR 450?
To disassemble the engine of the TM Racing SMR 450, it will be necessary to first unscrew the bolts that secure the block to its housing, so that the latter …Read all…
Posted on 22 March 2025 by ScegliAuto
Tm Racing Smr 450 F
How do you dismantle the engine of the TM Racing SMR 450 F?
In order to disassemble the engine of the TM Racing SMR 450 F, you need to loosen the screws that fix the piece to its housing located in the center of the …Read all…
Posted on 4 February 2025 by ScegliAuto
Tm Racing Smr 450 F
How to Dismantle the Engine of the TM Racing SMR 450
To dismantle the engine of the TM Racing SMR 450, first loosen the bolts that secure the engine block to its housing, allowing it to be completely removed. …Read all…
Posted on 19 September 2026 by ScegliAuto
Tm Racing Smr 450 F
How to Service the TM Racing SMR 450
In this video tutorial, learn how to perform the routine oil change service on a TM Racing SMR 450. First, remove the skid plate by unscrewing the securing …Read all…
Posted on 12 May 2026 by ScegliAuto
Tm Racing Smr 450 F
Check the Clutch on TM Racing SMR 450
Remove the round plastic cover from the fairing that covers the clutch by unscrewing the four screws. You will now find another cover with more screws: repeat …Read all…
Posted on 26 April 2026 by ScegliAuto

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos