Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Service the TM Racing SMR 450

Model: Tm Racing Smr 450 F
Part: Engine oil

Video tutorial

In this video tutorial, learn how to perform the routine oil change service on a TM Racing SMR 450. First, remove the skid plate by unscrewing the securing torx screws, then unscrew the oil drain bolt and let the oil drain into a container for about twenty minutes.

Once done, replace the bolt and unscrew the oil filter screws, replacing it with the correct new one. Finally, pour in the new engine oil with the correct specifications and fill to the level (approximately 1.5 litres).


Updated on 8 April 2026 by ScegliAuto


Related tutorials

How do you dismantle the engine of the TM Racing SMR 450 F?
How do you dismantle the engine of the TM Racing SMR 450 F?
Smr 450 F In order to disassemble the engine of the TM Racing SMR 450 F, you need to loosen the screws that fix the piece to its housing located in the center …
How do you replace the motor oil of the TM Racing SMR 450?
How do you replace the motor oil of the TM Racing SMR 450?
Smr 450 F In order to replace the motor oil of the TM Racing SMR 450, you need to loosen the oil tank drain plug, which is located at the bottom of the vehicle…
How do you disassemble the engine of the TM Racing SMR 450?
How do you disassemble the engine of the TM Racing SMR 450?
Smr 450 F To disassemble the engine of the TM Racing SMR 450, it will be necessary to first unscrew the bolts that secure the block to its housing, so that the…

How to Change the Engine Oil in the Yamaha XMAX 300 Scooter?

In this tutorial, you will see how to change the engine oil in the Yamaha XMAX 300 scooter, a very simple and quick operation. First, ensure that the engine is sufficiently cool, then position a container underneath the scooter, locate the drain bolt, and loosen it using a 12 mm socket spanner. Allow all the oil in the system to drain out, then open the filter cap and insert the replacement. At this point, simply reassemble everything and pour in the necessary amount of oil through the designated hole.

Watch the video!


by ScegliAuto

More videos