Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you dismantle the engine of the TM Racing SMR 450 F?

Model: Tm Racing Smr 450 F
Part: Engine

Video tutorial

In order to disassemble the engine of the TM Racing SMR 450 F, you need to loosen the screws that fix the piece to its housing located in the center of the frame: once these screws have been loosened, it will be possible to disconnect all the connectors and also the intake and exhaust manifolds.

Then you can proceed by loosening the engine head and the corresponding cylinder, so that you can access the piston inside: the latter can be detached from the corresponding connecting rod in order to access the crankshaft and replace all the necessary components.


Posted on 4 February 2025 by ScegliAuto


Related tutorials

How do you disassemble the engine of the TM Racing SMR 450?
How do you disassemble the engine of the TM Racing SMR 450?
Smr 450 F To disassemble the engine of the TM Racing SMR 450, it will be necessary to first unscrew the bolts that secure the block to its housing, so that the…
How to Dismantle the Engine of the TM Racing SMR 450
How to Dismantle the Engine of the TM Racing SMR 450
Smr 450 F To dismantle the engine of the TM Racing SMR 450, first loosen the bolts that secure the engine block to its housing, allowing it to be completely re…
How do you replace the motor oil of the TM Racing SMR 450?
How do you replace the motor oil of the TM Racing SMR 450?
Smr 450 F In order to replace the motor oil of the TM Racing SMR 450, you need to loosen the oil tank drain plug, which is located at the bottom of the vehicle…

How to Change the Engine Oil in the Yamaha XMAX 300 Scooter?

In this tutorial, you will see how to change the engine oil in the Yamaha XMAX 300 scooter, a very simple and quick operation. First, ensure that the engine is sufficiently cool, then position a container underneath the scooter, locate the drain bolt, and loosen it using a 12 mm socket spanner. Allow all the oil in the system to drain out, then open the filter cap and insert the replacement. At this point, simply reassemble everything and pour in the necessary amount of oil through the designated hole.

Watch the video!


by ScegliAuto

More videos