Do it yourself
Frequently asked questions about cars and motorcycles
To dismantle the engine of the TM Racing SMR 450, first loosen the bolts that secure the engine block to its housing, allowing it to be completely removed. After removing the engine from its location, loosen the screws that secure the protective covers of the internal engine components. Once the parts are removed, you can identify the internal gears, which can be taken out by unscrewing their respective fixing nuts. Once the components inside the engine have been replaced, refit the cover and reposition the engine in its place.

Updated on 3 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Smr 450 F In order to disassemble the engine of the TM Racing SMR 450 F, you need to loosen the screws that fix the piece to its housing located in the center …
Smr 450 F To disassemble the engine of the TM Racing SMR 450, it will be necessary to first unscrew the bolts that secure the block to its housing, so that the…
Smr 450 F In order to replace the motor oil of the TM Racing SMR 450, you need to loosen the oil tank drain plug, which is located at the bottom of the vehicle…

How to Replace the Tyres on the Husaberg FE 450

In this guide, follow the instructions to remove and replace the tyres on the Husaberg FE 450 enduro bike. First, place the bike on a stand and lift the wheel off the ground; then, undo the bolts securing the brake caliper to remove it, as shown in the video. Next, unscrew the central axle of the wheel, removing the tyre from the rim (deflating it and using levers); then install the new tyre, ensuring it has the correct dimensions, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos