Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Sienna
    4. : Headlight bulb

Toyota Sienna - Headlight bulb

Toyota Sienna (2010-2020 / Xl30)
How to replace the headlight bulb of the Toyota Sienna
The replacement of the headlight bulb of your Toyota Sienna Xl 30 (year 2010-2020) requires a few simple steps that we will discover together in this new mini …read all…
Posted on 9 May 2024 by ScegliAuto
Toyota Sienna (2010-2020 / Xl30)
How to change the front headlight bulb of the Toyota Sienna 2.
In the following guide dedicated to all of you owners of a Toyota Sienna Mk2 (year 2010-2020), we will describe step by step all the necessary steps to …read all…
Posted on 9 February 2024 by ScegliAuto
Toyota Sienna (2010-2020 / Xl30)
How to replace the headlight bulb on Toyota Sienna
If we want to proceed to change a bulb that may have burned out on the headlight of this car, we will find information on how to move in the description below …read all…
Posted on 10 June 2022 by ScegliAuto
Air Vents (1) Key (2) -board computer (3) Checks and maintenance (8) Headlight (1) Air filter (1) Cabin air filter (1) Headlight bulb (3) Handle (1) Engine oil (1) Tires (2) Fuel pump (1) Instrument cluster (11) Fuse box (5) Crankshaft RPM sensor (1) Outside rearview mirror (1) Windshield washer nozzle (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos