Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Sienna
  6. : How to change the front headlight bulb of the Toyota Sienna 2.

Toyota Sienna - Video tutorial

Model: Toyota Sienna Xl30 - Years 2010-2020
Part: Headlight bulb
Operation: How to change the front headlight bulb of the Toyota Sienna 2.

In the following guide dedicated to all of you owners of a Toyota Sienna Mk2 (year 2010-2020), we will describe step by step all the necessary steps to successfully complete the correct replacement of the front headlight bulb. First, turn off the car and let the engine cool down so that you can safely perform the replacement. Then, lift the front hood and remove the protective cap located at the back of the headlight. At this point, remove the bulb holder and replace it with a new one that is perfectly compatible.


Posted on 9 February 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos