Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Tundra
    4. : 2000-2006 (Xk30, Xk40)

Toyota Tundra Years 2000-2006 (Xk30, Xk40)

Toyota Tundra (2000-2006 / Xk40, Xk30)
Where is the fuse box located in the 2002 Toyota Tundra?
In the following guide dedicated to your Toyota Tundra first generation (year 2002), we will discover where the fuse box is located and how to access the fuses …read all…
Posted on 6 March 2024 by ScegliAuto
Toyota Tundra (2000-2006 / Xk40, Xk30)
What is the fuse diagram for the Toyota Tundra pick-up truck?
In this video we can see where the fuse boxes are located in the Toyota Tundra pick-up and what the corresponding diagrams are, to consult in case we need to …read all…
Posted on 28 February 2024 by ScegliAuto
Toyota Tundra (2000-2006 / Xk40, Xk30)
How to disassemble the rear tailgate handle on a Toyota Tundra pickup truck?
In this tutorial, we can see how to remove the rear door handle in the Toyota Tundra pickup truck, a very simple and quick operation. First, we lower the …read all…
Posted on 12 February 2024 by ScegliAuto
Toyota Tundra (2000-2006 / Xk40, Xk30)
How to replace the front headlight bulb of the Toyota Tundra.
To successfully replace the front headlight bulb of your Toyota Tundra first generation (year 2000-2006), simply follow the steps described in our new …read all…
Posted on 4 September 2023 by ScegliAuto
Toyota Tundra (2000-2006 / Xk40, Xk30)
How to program a new key for Toyota Tundra?
To program a new key for the Toyota Tundra we must scrupulously follow the instructions given in the video which are as follows: 1) enter the passenger …read all…
Posted on 10 December 2022 by ScegliAuto
Airbags (1) Key (4) Checks and maintenance (8) Headlight (1) Air filter (1) Cabin air filter (1) Headlight bulb (2) Handle (1) Engine oil (2) Door panel (1) Tires (1) Instrument cluster (6) Fuse box (4) Outside rearview mirror (1)

See also:

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos