Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Tundra
    4. : How to replace the front headlight bulb of the Toyota Tundra.

Toyota Tundra - Video tutorial

Model: Toyota Tundra Xk40, Xk30 - Years 2000-2006
Part: Headlight bulb
Operation: How to replace the front headlight bulb of the Toyota Tundra.

To successfully replace the front headlight bulb of your Toyota Tundra first generation (year 2000-2006), simply follow the steps described in our new dedicated guide. First, completely turn off your Toyota Tundra and raise the front hood. Make sure the engine compartment is cool enough, then position yourself in front of the headlight that needs replacement and disconnect the electrical cable. Next, remove the protective cap and proceed with replacing the old bulb with the new one.


Posted on 4 September 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos