Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Toyota Tundra - Key

Toyota Tundra (2007-2021 / Xk50)
How to change the battery of a Toyota Tundra key.
Let's go see, thanks to this very useful video guide today, all the necessary steps to change the battery of a Toyota Tundra key, a specific model produced …read all…
Posted on 16 November 2023 by ScegliAuto
Toyota Tundra (2007-2021 / Xk50)
How to replace the Toyota Tundra remote control battery
To replace the remote control battery of a Toyota Tundra, model year 2019/21, we must first of all remove the physical key by pressing the appropriate rubber …read all…
Posted on 18 December 2022 by ScegliAuto
Toyota Tundra (2000-2006 / Xk40, Xk30)
How to program a new key for Toyota Tundra?
To program a new key for the Toyota Tundra we must scrupulously follow the instructions given in the video which are as follows: 1) enter the passenger …read all…
Posted on 10 December 2022 by ScegliAuto
Toyota Tundra (2022-2024 / Xk70)
How to replace the Toyota Tundra key battery
If you want to find out how to correctly replace the button battery in the key of your new Toyota Tundra, then all you have to do is read the following mini …read all…
Posted on 10 June 2022 by ScegliAuto
Airbags (1) Key (4) Checks and maintenance (8) Headlight (1) Air filter (1) Cabin air filter (1) Headlight bulb (2) Handle (1) Engine oil (2) Door panel (1) Tires (1) Instrument cluster (6) Fuse box (4) Outside rearview mirror (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos