Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Toyota Tundra Remote

Model: Toyota Tundra Xk50 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Key

See other generations:
Video tutorial

To replace the battery in a 2019/21 Toyota Tundra remote, first remove the physical key by pressing the rubber release button and sliding it out. Once done, insert the same key into the designated slot where it was previously housed and turn it to apply pressure on both halves of the remote to separate them.

Once the remote is open, you will see the old battery that needs to be replaced, so remove it and insert a new one. Finally, close the remote by reversing the procedure.

The required battery is a CR2032 3V.


Updated on 20 June 2026 by ScegliAuto


Related tutorials

How to deactivate the traction control (TRC) on the Toyota Tundra
How to deactivate the traction control (TRC) on the Toyota Tundra
Toyota Tundra (2007-2021 / Xk50) In this guide, we will see the instructions that will allow us to deactivate the traction control of the Toyota Tundra; it is recommended not to disa…
How to Disable Traction Control in a Toyota Tundra?
How to Disable Traction Control in a Toyota Tundra?
Toyota Tundra (2007-2021 / Xk50) To disable the traction control in a Toyota Tundra, turn on the ignition so you can use the control buttons located next to the steering column: here…
How do you deactivate the traction control of the Toyota Tundra?
How do you deactivate the traction control of the Toyota Tundra?
Toyota Tundra (2007-2021 / Xk50) To deactivate the traction control of the Toyota Tundra, you will need to insert the ignition key into the corresponding slot, in order to turn on th…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos