Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear seat of the Toyota Prius

Model: Toyota Prius MK 3, Xw50 - Years 2016-2023
Part: Rear bench seat

Below are the instructions that will allow us to disassemble and replace the rear seat of the Toyota Prius, in simple and quick steps. First, we open the rear doors and start lifting our rear seat to detach it from the hooks underneath; remove it from the cabin to carry out the repair or eventual replacement, as shown in the video. At this point, it will also be possible to remove the backrests of the rear seats, unscrewing the screws at the base of them; apply the reverse process for reassembly!

Posted on 26 August 2024 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD port of the Toyota Prius located?
Where is the OBD port of the Toyota Prius located?
Toyota Prius (2009-2015 / Xw30, MK 2) Locating the OBD port inside your Toyota Prius is really very simple and you don't need to disassemble any component of the car. All you have to do i…
How to Remove the Rear Seats in the Toyota Prius?
How to Remove the Rear Seats in the Toyota Prius?
Toyota Prius (2009-2015 / Xw30, MK 2) In this tutorial, you will see how to remove the rear seats in the Toyota Prius, a very simple and quick operation, for example, if you need more spa…
Removing the Rear Seats from a Toyota Prius
Removing the Rear Seats from a Toyota Prius
Toyota Prius (2004-2009 / MK 1) Today, we will see how to remove the rear seats from a first-generation Toyota Prius, following these instructions. First, open the rear doors and th…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos