Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure light on the Toyota RAV4

Model: Toyota Rav 4 MK 4, Xa40 - Years 2013-2018
Part:

When the tire pressure warning appears on the instrument panel, it is likely that there is a loss of pressure in one or more tires; let's see how to reset it on the Toyota RAV 4. Before resetting, it is necessary that all four tires are at the correct pressure; then we get into the car and turn on the instrument panel. At this point, we press and hold the TPMS reset button located at the bottom, above the pedals; we wait for the tire pressure light to flash until it is completely reset from the panel!

Posted on 13 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure light on the Toyota RAV4
How to reset the tire pressure light on the Toyota RAV4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) In this guide, we will see the instructions that will allow us to reset the tire pressure warning on the Toyota RAV 4; before resetting the TPMS sens…
How to reset the tire pressure light on the Toyota RAV4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) The ignition of the tire pressure warning light indicates a possible puncture or loss of pressure; let's see how to reset the TPMS light on the Toyot…
How do you reset the tire pressure light on the Toyota RAV4?
How do you reset the tire pressure light on the Toyota RAV4?
Toyota Rav 4 (2019-2026 / Xa50, MK 5) On the instrument panel of the Toyota RAV 4, the tire pressure warning light that is displayed can be reset by inflating the tires until they are bro…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos