Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure light on the Toyota RAV4

Model: Toyota Rav 4 MK 4, Xa40 - Years 2013-2018
Part:

In this guide, we will see the instructions that will allow us to reset the tire pressure warning on the Toyota RAV 4; before resetting the TPMS sensors, it is necessary that all four tires are at the correct pressure. So, let's get on board the car and start the instrument panel; then, press and hold the TPMS reset button located at the bottom, under the steering wheel, until the tire pressure warning is correctly reset on the instrument panel. Finally, turn off the panel and start the engine!

Posted on 30 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on the Toyota RAV4
How to Reset the Tyre Pressure Warning Light on the Toyota RAV4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) Today, in this brief and simple guide, you will see the steps to reset the tyre pressure warning light (TPMS) on the Toyota RAV4; before performing t…
How to reset the tire pressure light on the Toyota RAV 4
How to reset the tire pressure light on the Toyota RAV 4
Toyota Rav 4 (2019-2026 / Xa50, MK 5) Today's step-by-step instructions will show us how to reset the tire pressure monitoring system (TPMS) light on a Toyota RAV 4; before proceeding wit…
How to reset the tire pressure light on the Toyota RAV4
How to reset the tire pressure light on the Toyota RAV4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) When the tire pressure warning appears on the instrument panel, it is likely that there is a loss of pressure in one or more tires; let's see how to …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos