|
Do it yourself
| |||
| ||||
Changing Tyres and Cleaning the Brake Caliper on a Toyota Rav 4
Model: Toyota Rav 4
Xa50, MK 5
- Years 2019-2026
Position the vehicle on a level surface, without incline, and secure it by engaging the handbrake and putting it in first gear. Loosen the wheel nuts and position the jack to begin lifting the vehicle. For safety, place axle stands and put a board (or suitable chocks) in front of the front wheels to secure the vehicle. You can now remove the jack, and the car will be held by the axle stands. Unscrew the bolts from the wheel and remove it from the hub. At this point, using a bucket with degreaser, start cleaning the brake caliper with a brush. It is advisable to also use brake cleaner spray, which has triple action to clean, lubricate, and protect your braking system and all its components. Once done, remount the seasonal tyre (summer and/or winter). Lightly screw the wheel nuts, reposition the jack, and lift the vehicle. Now remove the axle stands and lower the vehicle from the jack. Afterwards, you can tighten the wheel nuts securely. For a proper job, tighten the nuts using a torque wrench, referring to the manufacturer's specifications or the maintenance manual. Always check your work before driving.
Updated on 28 May 2026 by ScegliAuto
Video tutorial
Related tutorials
Toyota Rav 4
(2006-2013 /
MK 3, Xa30)
Let's replace the front brake pads on a Toyota Rav 4. Lift the vehicle on a column lift to the desired height, remove the wheel (using a telescopic s…
Toyota Rav 4
(2000-2006 /
Xa20, MK 2)
How do you remove the EGR valve mounted on a Toyota Rav 4? Lift the engine bonnet and secure it, then use a screwdriver to unscrew the locking bolts …
Toyota Rav 4
(2006-2013 /
MK 3, Xa30)
In this video, learn how to remove and replace the front brake pads on a Toyota Rav 4 Mk3 by following these simple and quick steps. First, lift the …
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.160
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |