Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the license plate light of the Toyota Proace

Model: Toyota Proace Verso MK 1 - Years 2016-2026
Part: License plate light

To replace the license plate light of your Toyota Proace, you just need to follow the procedure described in our new guide. First of all, open the rear hatch and remove all the various safety clips located along the perimeter of the plastic protection panel. After removing all the caps, pull the plastic panel towards you and completely remove it. Finally, disconnect the electrical cable connected to the bulb holder and replace the faulty bulb with a new one that is perfectly compatible. Reassemble the hatch panel and you're done.

Posted on 24 May 2025 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Fuse Box on the Toyota Proace
Where to Find the Fuse Box on the Toyota Proace
Toyota Proace Verso (2016-2026 / MK 1) In this guide for Toyota Proace owners, discover where the fuse box is located and how to access it. First, enter the vehicle and ensure it is comple…
How to reset the AdBlue warning light on the Toyota Proace?
How to reset the AdBlue warning light on the Toyota Proace?
Toyota Proace Verso (2016-2026 / MK 1) To reset the AdBlue warning light on the Toyota Proace, first top up the additive in the relevant tank; if the light remains on after topping up, the…
How do you reset the tire pressure warning light on the Toyota Proace?
How do you reset the tire pressure warning light on the Toyota Proace?
Toyota Proace Verso (2016-2026 / MK 1) To make the tire pressure warning light disappear from the dashboard of the Toyota Proace, you first need to inflate the tires until they reach the o…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos