Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the number plate light bulbs on a Toyota Corolla?

Model: Toyota Corolla MK 5, E210 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: License plate light

See other generations:
Video tutorial

In this tutorial, we will see how to replace the number plate light bulbs on a Toyota Corolla, a very simple and quick operation. First, ensure that the instrument cluster is off for safety, then open the boot and unclip the panel at the back.

Next, locate the first number plate light, disconnect the relevant power connector, and unclip the outer frame. At this point, simply remove the light, replace the bulb, reassemble everything following the reverse procedure, and if necessary, repeat the operation on the opposite side.


Posted on 25 October 2026 by ScegliAuto


Related tutorials

Replacing Number Plate Lights on Toyota Corolla
Replacing Number Plate Lights on Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) To access the number plate lights on a Toyota Corolla, you first need to remove the internal cover of the boot lid. This is quite simple: using a sui…
Replacing the rear light bulbs of the Toyota Corolla
Replacing the rear light bulbs of the Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) Here are the instructions for removing and replacing the rear light bulbs of the Toyota Corolla. First, open the boot lid and start removing the side…
Changing Bulbs on Toyota Corolla Verso
Changing Bulbs on Toyota Corolla Verso
Toyota Corolla (2006-2013 / MK 3) Let's look at removing the front headlamp bulbs on a Toyota Corolla Verso. First, open the front engine compartment, locate the caps that cover the f…

How to Open the Bonnet of the Mitsubishi L 200

In this brief and simple guide, follow these quick steps to open the bonnet of the Mitsubishi L 200. First, open the front door on the driver's side and pull the release lever for the bonnet lock. Next, move to the front of the vehicle and disengage the lock lever to open it. The bonnet will be held up by hydraulic struts; to close it, push the bonnet down and apply pressure to secure it properly!

Watch the video!


by ScegliAuto

More videos