Do it yourself
Frequently asked questions about cars and motorcycles

Replacing Number Plate Lights on Toyota Corolla

Model: Toyota Corolla MK 3 - Years 2006-2013
Part: License plate light

To access the number plate lights on a Toyota Corolla, you first need to remove the internal cover of the boot lid. This is quite simple: using a suitable wedge or a small flat-head screwdriver, remove the nine clips that secure the cover around the area. When you reach the last of the nine clips, pull the cover off with your hands. At this point, you will see the two bulbs, or more accurately, their rear connectors: unscrew them and remove the bulbs with their holders, then replace the bulb and proceed in reverse until fully reassembled.

Updated on 6 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Toyota Corolla (2013-2019 / MK 4, E170, E160) To replace the number plate bulb on a Toyota Corolla, open the boot to access the internal rivets. Remove these rivets to shift the carpet, allowing …
Toyota Corolla (2006-2013 / MK 3) To replace the number plate bulb on a Toyota Corolla, lift the tailgate. This will allow you to use a tool to detach the internal carpet lining of th…
Toyota Corolla (2006-2013 / MK 3) If the license plate light of your Toyota Corolla Mk3 has suddenly stopped working, you must proceed with its replacement as soon as possible, otherw…

How to Replace the Cabin Filter on the Opel Grandland X

If you own an Opel Grandland X and want to know the steps to replace the cabin air filter, carefully read the following guide and follow the described steps. First, enter the vehicle and go to the passenger side. Then, locate the box containing the air filter in the lower side area of the dashboard. Remove the cover of the box and finally replace the old filter with the new one. Refit the cover, and you are done.

Watch the video!


by ScegliAuto

More videos