Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the tire pressure sensors of the Toyota Prius.

Model: Toyota Prius Xw30, MK 2 - Years 2009-2015
Part:

The instructions in this guide will show us how to reset the tire pressure warning of the Toyota Prius; before resetting the TPMS sensors, it is necessary that all four tires are at the correct pressure. So, let's get into the car and start the instrument panel; then press and hold the TPMS reset button located at the bottom on the driver's side, above the pedals, until the tire pressure warning light on the instrument panel of the car is correctly reset.

Posted on 12 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Tyre Pressure Sensors on a Toyota Prius
How to Replace the Tyre Pressure Sensors on a Toyota Prius
Toyota Prius (2009-2015 / Xw30, MK 2) You can replace the tyre pressure sensors on a Toyota Prius by deflating the wheels and completely removing them from their housings. Once the wheel …
Resetting the tire pressure warning for the Toyota Prius
Resetting the tire pressure warning for the Toyota Prius
Toyota Prius (2016-2023 / MK 3, Xw50) Let's discover the process that will allow us to reset the tire pressure warning on the Toyota Prius. Before resetting the warning, it is necessary t…
How to Reset the "Service" Light on a Toyota Prius?
How to Reset the "Service" Light on a Toyota Prius?
Toyota Prius (2023-2026 / MK 4, Xw60) Good morning, today’s objective is to reset the "Service" light on your Toyota Prius. Start by sitting in the driver’s seat. Then, by pressing the ig…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos