Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Tyre Pressure Light on the Toyota Prius?

Model: Toyota Prius Xw30, MK 2 - Years 2009-2015
Part: Tire pressure warning light

To reset the tyre pressure light on the Toyota Prius, first inflate the tyres until they reach the correct pressure value: this value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, enter the cabin and turn on the ignition: this will allow you to check that the light disappears from the dashboard. If the light remains on, drive for a few miles to allow the sensors to read the new pressure values.

Updated on 9 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Toyota Prius (2009-2015 / Xw30, MK 2) To reset the tyre pressure warning light on a Toyota Prius, first inflate the car's tyres to the correct pressure: once the tyres are inflated, enter…
Toyota Prius (2009-2015 / Xw30, MK 2) In order to reset the tire pressure warning light on the Toyota Prius, it is necessary to inflate the car tires, bringing them all to the correct inf…
Toyota Prius (2009-2015 / Xw30, MK 2) To reset the tyre pressure warning light on a Toyota Prius, inflate the tyres to the recommended pressure value: this value is indicated on the stick…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos