Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Find the OBD Port on a Toyota Prius

Model: Toyota Prius Xw30, MK 2 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Dashboard

See other generations:
Video tutorial

Locating the OBD port inside your Toyota Prius is very simple, and you do not need to remove any components of the car. All you need to do is carefully read the following guide and follow the described steps. First, get into the driver's seat and turn off the car if it is still running, then shift your attention to the lower area of the dashboard to find the OBD port you are looking for. Once found, you can connect any compatible diagnostic tool to access the vehicle's ECU.


Updated on 7 October 2026 by ScegliAuto


Related tutorials

Where to Find the OBD Port of the Toyota Prius 2
Where to Find the OBD Port of the Toyota Prius 2
Toyota Prius (2009-2015 / Xw30, MK 2) To locate the OBD port inside your Toyota Prius second generation, follow the steps outlined in this guide. First, get into the car and reach the dri…
How to Disable the Reversing Beep on the Toyota Prius?
How to Disable the Reversing Beep on the Toyota Prius?
Toyota Prius (2009-2015 / Xw30, MK 2) To disable the reversing beep on the Toyota Prius, connect a diagnostic tool to the vehicle's OBD port: this is located on the lower left side of the…
Where is the auxiliary battery located in the Toyota Prius?
Toyota Prius (2009-2015 / Xw30, MK 2) In this video, you can see where the auxiliary battery is located in the Toyota Prius and how to proceed if you need to replace it. As shown, it is n…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos