Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disable the Reversing Beep on the Toyota Prius?

Model: Toyota Prius Xw30, MK 2 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Checks and maintenance

See other generations:
Video tutorial

To disable the reversing beep on the Toyota Prius, connect a diagnostic tool to the vehicle's OBD port: this is located on the lower left side of the dashboard, near the steering column. Once the tool is connected, you can select the specific car model and its corresponding version: then, following all further instructions in the tutorial, you will notice that the beep has been disabled.

At the end of the operation, disconnect the scanner and switch off the ignition.


Updated on 23 August 2026 by ScegliAuto


Related tutorials

Disabling the Alarm Beeper
Toyota Prius (2004-2009 / MK 1) The engine of the Toyota Prius shuts off when you stop, so it’s easy to forget it will move when you press the accelerator. As a safety measure, Toyo…
How to deactivate the traction control of the Toyota Prius
How to deactivate the traction control of the Toyota Prius
Toyota Prius (2004-2009 / MK 1) For illustrative purposes, we will see the procedure that will allow us to disable the traction control of the Toyota Prius; it is recommended not to…
How to deactivate the TRC traction control on the Toyota Prius
How to deactivate the TRC traction control on the Toyota Prius
Toyota Prius (2004-2009 / MK 1) For illustrative purposes, we will see the instructions that will allow us to deactivate the traction control TRC on the Toyota Prius; it is recommen…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos