Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a 2022 Toyota Yaris Cross

Model: Toyota Yaris Cross MK 1 - Years 2020-2026
Part: Service warning light

Today, I will explain how to reset the service light on a 2022 Toyota Yaris Hybrid. Turn on the vehicle's instrument panel and press the arrow button to access the settings menu, select "Vehicle Settings" and then "Service". Follow the instructions displayed by pressing the brake pedal for about 10 seconds. After releasing the pedal, wait for the mileage to load for the next service and restart the instrument panel. If the reset fails, take the vehicle to a workshop for a diagnostic check.

Posted on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the "Service" light of a Toyota Yaris Cross?
How to reset the "Service" light of a Toyota Yaris Cross?
Toyota Yaris Cross (2020-2026 / MK 1) To reset the "Service" light on a Toyota Yaris Cross, turn on the instrument panel without starting the engine by pressing the ignition button. Use t…
How to Reset the Tyre Pressure Light on the Toyota Yaris Cross
How to Reset the Tyre Pressure Light on the Toyota Yaris Cross
Toyota Yaris Cross (2020-2026 / MK 1) These brief and simple instructions will show you how to reset the tyre pressure light on the Toyota Yaris Cross; before resetting the TPMS sensors, …
How to Reset the Tyre Pressure Warning Light on the Toyota Yaris Cross?
How to Reset the Tyre Pressure Warning Light on the Toyota Yaris Cross?
Toyota Yaris Cross (2020-2026 / MK 1) To reset the tyre pressure warning light on the Toyota Yaris Cross, turn on the instrument panel and then use the directional arrows on the left stee…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos