Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a 2012 Toyota Tundra

Model: Toyota Tundra Xk50 - Years 2007-2021
Part: Service warning light

Today, you will learn how to reset the maintenance light on a 2012 Toyota Tundra. To perform the reset, turn on the ignition and press the TRIP A button located under the display near the odometer. Hold the button until the display shows the message to start the reset procedure; then release and press it a second time to complete the procedure, after which the light will turn off. If the reset fails, connect a diagnostic computer to the OBD port.

Posted on 29 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the "Service" light on a Toyota Tundra?
How to reset the "Service" light on a Toyota Tundra?
Toyota Tundra (2022-2026 / Xk70) To reset the "Service" light on a Toyota Tundra, start by turning on the instrument panel without starting the engine. Using the buttons on the steer…
How to reset the "Service" indicator on a Toyota Tundra?
How to reset the "Service" indicator on a Toyota Tundra?
Toyota Tundra (2022-2026 / Xk70) To reset the "Service" light on a Toyota Tundra, turn on the instrument panel without starting the engine. Use the buttons on the steering wheel to n…
How to Reset the Service Light on a Toyota Tundra?
How to Reset the Service Light on a Toyota Tundra?
Toyota Tundra (2022-2026 / Xk70) To reset the Service light on your Toyota Tundra, insert the key into the ignition and turn it to the ON position. Once the dashboard lights up, navi…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos