Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Light on a Toyota Tundra

Model: Toyota Tundra Xk50 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Warning light – error code

See other generations:
Video tutorial

If the maintenance light appears on the instrument panel of your Toyota Tundra even after performing the regular service, follow these steps to manually reset the light. First, get in the vehicle and turn on the ignition.

Then, locate the button below the speedometer and press it. At the same time, turn the ignition off and then back on, and wait for the maintenance light reset procedure to complete. Turn off the ignition, and if you did not make any mistakes, the light will not come on again at the next start.


Updated on 20 October 2026 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a Toyota Tundra?
How to Reset the "Service" Light on a Toyota Tundra?
Toyota Tundra (2022-2026 / Xk70) To reset the "Service" light on a Toyota Tundra, start by turning on the instrument cluster without starting the engine. Using the buttons on the ste…
How to reset the maintenance light on the 2010 Toyota Tundra
How to reset the maintenance light on the 2010 Toyota Tundra
Toyota Tundra (2007-2021 / Xk50) To complete the manual reset procedure of the maintenance light of your 2010 Toyota Tundra, simply follow all the steps described in the following gu…
How to Reset the Tire Pressure Light on a Toyota Tundra
How to Reset the Tire Pressure Light on a Toyota Tundra
Toyota Tundra (2022-2026 / Xk70) Today, we will go over the instructions to reset the tire pressure light on a Toyota Tundra. Before resetting the TPMS sensors, ensure that all four …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos