Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Central Display on the Toyota Yaris Cross

Model: Toyota Yaris Cross MK 1 - Years 2020-2026
Part: Car stereo

To replace the central display on the Toyota Yaris Cross, you will need to pry off the trim panel surrounding the display. Once the trim is removed, you can access the screws underneath that need to be loosened to extract the screen by disconnecting the connectors at the back. At this point, connect the new screen to the connectors, insert it into its housing, secure it with the screws, and cover it with the corresponding trim.

Posted on 7 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the central display on the Toyota Yaris Cross?
How to replace the central display on the Toyota Yaris Cross?
Toyota Yaris Cross (2020-2026 / MK 1) You can replace the central display on the Toyota Yaris Cross by prying off the trim located beneath the screen with an object like a screwdriver. At…
How do you set the clock on the Toyota Yaris Cross?
How do you set the clock on the Toyota Yaris Cross?
Toyota Yaris Cross (2020-2026 / MK 1) The operation of adjusting the clock on the Toyota Yaris Cross is done by turning on the instrument panel, turning the appropriate key, and then movi…
Where to Find and How to Access the Fuse Box of a Toyota Yaris Cross?
Where to Find and How to Access the Fuse Box of a Toyota Yaris Cross?
Toyota Yaris Cross (2020-2026 / MK 1) Good morning, today you will locate and access the fuse box of your Toyota Yaris Cross. First, open the front engine bonnet. You will notice a black …

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos