Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Toyota Hilux?

Model: Toyota HiLux An30, An20, MK 7, An10 - Years 2005-2015
Part: Service warning light

To clear the Service light on a Toyota Hilux, turn on the ignition and repeatedly press the ODO TRIP button until "Trip A" appears on the instrument panel. Once this message is displayed, turn off the ignition and press and hold the same button again. While holding the button, insert the ignition key and turn it to the ON position. Keep holding the button, and after a few seconds, the light will turn off completely, allowing you to remove the key.

Posted on 23 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on a Toyota Hilux?
How to Reset the "Service" Light on a Toyota Hilux?
Toyota HiLux (2015-2024 / An130, An120, MK 8) Hello, today’s goal is to reset the "Service" light on our Toyota Hilux. Start by sitting in the driver’s seat. Once seated, press the ignition butto…
How do you reset the Service light on the Toyota Hilux?
Toyota HiLux (2015-2024 / An130, An120, MK 8) To reset the Service light that appears on the instrument panel of the Toyota Hilux, you need to turn on the instrument panel by inserting the corres…
How to Reset the Service Light on a Toyota Hilux?
How to Reset the Service Light on a Toyota Hilux?
Toyota HiLux (2005-2015 / An30, An20, MK 7, An10) To reset the Service light on a Toyota Hilux, turn on the ignition and then repeatedly press the ODO TRIP button until "Trip A" appears on the instru…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos