Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Toyota Hilux?

Model: Toyota HiLux An130, An120, MK 8 - Years 2015-2024
Part: Service warning light

You can reset the Service light displayed on the instrument panel of the Toyota Hilux by pressing and holding the button located at the bottom center of the panel while it is off: continue holding the button while inserting the ignition key into the switch to start a loading screen. When this screen disappears, you can release the button: this way, you can verify that the Service light has gone out, and then turn off the panel.

Posted on 7 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on a Toyota Hilux?
How to Reset the "Service" Light on a Toyota Hilux?
Toyota HiLux (2015-2024 / An130, An120, MK 8) Hello, today’s goal is to reset the "Service" light on our Toyota Hilux. Start by sitting in the driver’s seat. Once seated, press the ignition butto…
How to Reset the Service Light on a Toyota Hilux
How to Reset the Service Light on a Toyota Hilux
Toyota HiLux (2015-2024 / An130, An120, MK 8) Let's briefly review the procedure to reset the maintenance light for the engine oil change on a Toyota Hilux. First, get in the vehicle and press an…
How to reset the "Service" indicator on a Toyota Hilux?
How to reset the "Service" indicator on a Toyota Hilux?
Toyota HiLux (2015-2024 / An130, An120, MK 8) To reset the "Service" light on the Toyota Hilux, start by turning on the instrument panel without starting the engine. Using the buttons on the stee…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos