Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Toyota Hilux?

Model: Toyota HiLux An30, An20, MK 7, An10 - Years 2005-2015
Part: Service warning light

To reset the Service light on a Toyota Hilux, turn on the ignition and then repeatedly press the ODO TRIP button until "Trip A" appears on the instrument cluster. Once this message is displayed, turn off the ignition and press and hold the same button again. While holding the button, insert the ignition key and turn it to the ON position. Keep holding the button, and after a few seconds, the light will turn off, allowing you to turn off the instrument cluster.

Updated on 23 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on a Toyota Hilux?
How to Reset the "Service" Light on a Toyota Hilux?
Toyota HiLux (2015-2024 / An130, An120, MK 8) Hello, today’s goal is to reset the "Service" light on our Toyota Hilux. Start by sitting in the driver’s seat. Once seated, press the ignition butto…
How do you reset the Service light on the Toyota Hilux?
Toyota HiLux (2015-2024 / An130, An120, MK 8) To reset the Service light that appears on the instrument panel of the Toyota Hilux, you need to turn on the instrument panel by inserting the corres…
How to Reset the Service Light on the Toyota Hilux?
How to Reset the Service Light on the Toyota Hilux?
Toyota HiLux (2015-2024 / An130, An120, MK 8) You can reset the Service light displayed on the instrument panel of the Toyota Hilux by pressing and holding the button located at the bottom center…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos