Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Hybrid System on a Toyota Yaris Hybrid?

Model: Toyota Yaris - Years 2020-2026
Part: Checks and maintenance

There is no need to worry too much if your Toyota Yaris Hybrid shows one or more temporary and occasional anomalies; it may simply be the management software of the control unit having a glitch. It is advisable to visually check for any mechanical or electrical issues; otherwise, you should visit a workshop. If not, a reset may be the solution. Simply disconnect the negative terminal of the vehicle's power battery, wait a few minutes, and reconnect it. After doing this, check that all previously mentioned faults have disappeared.

Posted on 26 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Know the Fuse Diagrams for a Toyota Yaris Hybrid
How to Know the Fuse Diagrams for a Toyota Yaris Hybrid
Toyota Yaris (2011-2019 / Xp130) The first fuse box of a Toyota Yaris Hybrid can be found inside the vehicle's cabin, located low on the left under the steering column; this box cont…
How to deactivate the lane keeping assist system on the Toyota Yaris Hybrid?
How to deactivate the lane keeping assist system on the Toyota Yaris Hybrid?
Toyota Yaris (2020-2026 / MK 4) In this tutorial, you will see how to deactivate the lane keeping assist system on the Toyota Yaris Hybrid, a very simple and quick operation to perf…
How to Activate "Maintenance Mode" on a Toyota Hybrid
How to Activate "Maintenance Mode" on a Toyota Hybrid
Toyota Yaris (2020-2026 / MK 4) In this guide, learn how to activate "maintenance mode" on a Toyota Yaris Hybrid, which disables the electric motor while keeping the petrol engine r…

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2020-2027 - What problems does the 2020 Toyota Yaris Hybrid have? Read answer
    • Yaris 2005-2011 - Where is the 2010 Toyota Yaris jack located? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos