Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to deactivate the lane keeping assist system on the Toyota Yaris Hybrid?

Model: Toyota Yaris MK 4 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Checks and maintenance

See other generations:
Video tutorial

In this tutorial, you will see how to deactivate the lane keeping assist system on the Toyota Yaris Hybrid, a very simple and quick operation to perform if you find it too intrusive. First, enter the cabin, then insert the key and start the vehicle.

Next, access the general menu using the directional controls on the steering wheel, go to "Settings", then "Lane Departure Alert System" and select "Off". On the same screen, you can adjust various other system settings, such as its sensitivity.


Posted on 24 June 2026 by ScegliAuto


Related tutorials

How to Enter Maintenance Mode on Toyota Yaris Hybrid
How to Enter Maintenance Mode on Toyota Yaris Hybrid
Toyota Yaris (2020-2026 / MK 4) In this video tutorial, you will see how to enter maintenance mode on the Toyota Yaris Hybrid. By following a few simple steps, you will be able to m…
Resetting the Tyre Pressure Light on the 2020 Toyota Yaris Hybrid
Resetting the Tyre Pressure Light on the 2020 Toyota Yaris Hybrid
Toyota Yaris (2020-2026 / MK 4) When the pressure in your tyres drops or you replace them, the tyre pressure sensor light will appear on the dashboard of your 2020 Toyota Yaris Hybr…
How to Start a Toyota Yaris Hybrid with a Flat Battery
How to Start a Toyota Yaris Hybrid with a Flat Battery
Toyota Yaris (2020-2026 / MK 4) Starting a Toyota Yaris Hybrid with a flat battery is simple, but different from a traditional car. You do not need to look for the 12-volt battery u…

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2011-2019 - Can I replace the ignition switch on my Toyota Yaris myself? and how much is it? Read answer
    • Yaris 2020-2027 - What problems does the 2020 Toyota Yaris Hybrid have? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos