Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the steering wheel of the Toyota Yaris XP10

Model: Toyota Yaris Xp10 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Steering wheel

See other generations:
Video tutorial

If the steering wheel of the Toyota Yaris has deteriorated, or if we want to replace it with one that is more appealing aesthetically, let's see how to proceed with disassembly. Using a screwdriver, unscrew the screw under the lower spoke of the steering wheel to remove the central part that activates the horn, which we will remove after disconnecting the electrical connector.

Using a socket wrench, unscrew the central bolt, holding the old steering wheel, slide it off definitively. Take the new steering wheel, insert it onto the steering column, screw in the bolt and tighten it well using the socket wrench, reconnect the horn control connector, position the central part of the steering wheel and secure it with its screw.


Posted on 3 January 2025 by ScegliAuto


Related tutorials

Where is the Airbag Collision Sensor on the Toyota Yaris XP10?
Where is the Airbag Collision Sensor on the Toyota Yaris XP10?
Toyota Yaris (1999-2005 / Xp10) In this video, see where the airbag collision sensor is located on the Toyota Yaris XP10. The collision sensor is a fundamental component of a vehicl…
How to remove the steering wheel airbag of the Toyota Yaris
How to remove the steering wheel airbag of the Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) These short and simple instructions will guide us through the process of disassembling and replacing the steering wheel airbag of the Toyota Yaris. F…
How to Top Up the Coolant in a Toyota Yaris XP10
How to Top Up the Coolant in a Toyota Yaris XP10
Toyota Yaris (1999-2005 / Xp10) In this video, you will learn how to refill the coolant reservoir of a Toyota Yaris XP10. The reservoir cap is easily located by opening the front bo…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos