Do it yourself
| ||||
|
Toyota Yaris - Video tutorial
Model: Toyota Yaris
MK 4
- Years 2020-2024 When the pressure of your tires drops or you replace them, the tire pressure sensor light will appear on the dashboard of your Toyota Yaris Hybrid 2020. To disable it the method is very simple. On the dashboard. At the bottom under the steering wheel, you will find a hidden button. To deactivate the light just hold it down for a few seconds, you will see the light flash at first and then go off in a second. Once the button is released, the tire pressure warning light will be reset and the system pressure set again. You will also notice this when the tire pressure warning light on the car panel goes off.
Posted on 10 March 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.038
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |