Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Climate Control Bulbs on a Toyota Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Air conditioning

See other generations:
Video tutorial

How to replace the manual air conditioning bulbs on a Toyota Yaris? Follow these steps. Remove the right and left panels near the ventilation knobs using plastic levers.

After disconnecting the plastics, remove the air conditioning control knobs, taking out the damaged bulbs from the dashboard. Fit the new bulbs and prepare to refit the knob panel.

Be careful not to break the plastic tabs that secure the panel. Finally, test the installed bulbs by turning on the instrument cluster and climate controls.


Updated on 15 March 2026 by ScegliAuto


Related tutorials

Removing the Climate Control Knob Bulbs on a Toyota Yaris
Removing the Climate Control Knob Bulbs on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Removing the manual air conditioning bulbs on a Toyota Yaris. Follow these steps. Remove the right and left panels near the ventilation knobs using p…
How to remove the climate control panel from the Toyota Yaris
How to remove the climate control panel from the Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) This guide will show you how to disassemble and remove the climate control panel from the Toyota Yaris. First, get inside the cabin and start by remo…
Removing the Climate Control Controls from a Toyota Yaris
Removing the Climate Control Controls from a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) In this video tutorial, you will learn how to remove the central dashboard of the climate control controls from a Toyota Yaris. First, get inside the…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos