Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Headlamp Bulb

Model: Toyota Prius MK 1 - Years 2004-2009
Part: Headlight bulb

To replace the Xenon bulb in the left headlamp, it is not necessary to remove it, but to facilitate access for removing the cap, it is advisable to also remove the cover of the fuse box. Once the protective cover of the bulb holder is removed, disconnect the connector attached to the back of the bulb and release the retaining springs of the bulb itself to extract it from its housing. Then, apply the new bulb, ensuring not to touch the glass bulb, orient it correctly in its housing, reattach the retaining springs, then reconnect the power connector and finally refit the cap and the cover of the fuse box. For the right headlamp, however, it is necessary to remove it and proceed in the same way.

Updated on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Rear Headlamp Bulb Replacement
Rear Headlamp Bulb Replacement
Toyota Prius (2004-2009 / MK 1) Replacing the bulbs in the rear headlamp is extremely simple as it is not necessary to remove the headlamp itself: open the rear boot and locate the …
Replacing the Engine Air Filter
Replacing the Engine Air Filter
Toyota Prius (2009-2015 / Xw30, MK 2) Cleaning and replacing the engine air filter is crucial to ensure the correct supply of clean air to the engine: a clogged filter can impair its filt…
How to Replace the Wipers on the Toyota Prius
How to Replace the Wipers on the Toyota Prius
Toyota Prius (2016-2023 / MK 3, Xw50) This guide provides step-by-step instructions on how to remove and replace the front wipers and the rear wiper on the Toyota Prius. First, move to th…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos