Do it yourself
| ||||
|
Toyota Prius - Headlight bulb
Toyota Prius (2004-2009 / MK 1)
How to replace the front headlight bulbs in the Toyota Prius? In this tutorial we can see how to replace the front headlight bulbs in the Toyota Prius, an extremely simple and quick operation. First of all, make sure that …read all… Posted on 13 April 2024 by ScegliAuto
Toyota Prius (2009-2015 / Xw30, MK 2)
How to replace the front headlight bulbs of the Toyota Prius. Today's guide will show us the steps to disassemble and replace the headlights bulbs of the Toyota Prius. First, we open the car's engine hood and start by …read all… Posted on 31 July 2023 by ScegliAuto
Toyota Prius (2009-2015 / Xw30, MK 2)
Installation of LED headlight lights Replacing the headlight bulbs with others of the LED type rather than Xenon will give the car a decidedly more modern look as well as significantly improve …read all… Posted on 23 August 2023 by ScegliAuto
Toyota Prius (2004-2009 / MK 1)
Headlight bulb replacement In order to replace the headlight bulbs it is necessary to remove the headlight itself, which also requires the removal of the front bumper: first remove the …read all… Posted on 8 July 2023 by ScegliAuto
Toyota Prius (2004-2009 / MK 1)
Headlight bulb replacement To replace the Xenon bulb of the left headlight it is not necessary to disassemble it but to facilitate access and removal of the cap, it is advisable to also …read all… Posted on 7 July 2023 by ScegliAuto
Toyota Prius (2004-2009 / MK 1)
Removing the bumper and replacing the HID lamps This video shows how to remove the front bumper of a Toyota Prius in order to replace its HID lamps (xenon lamps). First, using a screwdriver, you will have to …read all… Posted on 7 July 2023 by ScegliAuto Shock absorbers (1) Antenna (3) Air conditioning (1) Battery (21) Spark plugs (3) Key (25) Timing belt (1) V-belt (3) -board computer (6) Checks and maintenance (32) Brake discs (1) Rear bench seat (2) Side indicator light (1) Headlight (2) Tail light (2) Air filter (5) Cabin air filter (12) Petrol filter (2) Accessory Kit (3) Light bulb (2) Headlight bulb (6) Rear light bulb (3) Antifreeze liquid (1) License plate light (2) Handle (1) Gear oil (1) Brake oil (1) Engine oil (8) Front bumper (3) Rear bumper (2) Brake pads (4) Hydraulic pistons (1) Tires (8) Fuel pump (1) Window lift button (1) Instrument cluster (8) Fuse box (7) Seat (3) Windscreen wipers (3) Central tunnel (2) Windshield washer nozzle (1) |
Handbrake adjustment on Ford EcosportFirst remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.011
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |